Adding Firewall Rules for DDM/DRDA Pre-check User Replacement

To add Firewall rules for DDM/DRDA pre-check user replacement for a user and system, press the F6 key from the Work with DDM/DRDA Pre-check User Replacement screen (STRFW > 14 > 1 ) as seen in Setting Firewall Rules for DDM/DRDA Pre-check User Replacement.

The Add DDM/DRDA Pre-check User Replacement screen appears:

​                   ​ Add DDM/DRDA Pre-check User Replacement​                                                                                                       ​ Type choices, press Enter.                                                    ​                                                                                     ​ Source location  . . . . . . . . .​ ​           ​  ​ Name                ​                                                                                            ​ Source user  . . . . . . . . . . .​ ​           ​  ​ Name, generic*, *ALL​         ​                                                                                   ​ Perform internal checks for user .​ ​           ​  ​ Name, F4 for list   ​                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     ​ F3=Exit   F4=Prompt   F12=Cancel​                                                ​                                                                                                                                                                  ​

Enter values for the following fields:

Source location

The name of the system from which the user is connecting.

Source user

A user name from the remote system. This can be a single name or generic* name or *ALL for all users for whom there are no more specific rules.

Perform internal checks for user

The user on the current system whose authority Firewall checks before doing its other checks. For a list of known users, press the F4 key.